DMRS 1000 Concrete Power Trowel Machine

Model: LW-1000A/LW-1000B/LW-1000C/LW-1000D
Grinding disc diameter: 1000mm
Blade size (length * width): 340*150mm
Blade thickness: 1.2/1.6/2.0/2.2mm
Rotor speed(r/min): 140/180
Power: 7.5hp
all above can be customised.


The chrome-plated road polishing machine model DMRS 1000 is a gasoline-powered machine used for lifting, smoothing and polishing of wet concrete surfaces. Its main structure is a spatula rotor driven by a motor or a gasoline engine, and 2 to 4 spatulas are installed on the bottom surface of the cross in the middle of the rotor. This machine can be widely used in the field of workshops, warehouses, parking lots, squares, airports and framed buildings. It is a helpful machine tool in concrete construction.


1. The polished concrete road surface is smoother and flatter than the manual-processed surface, which can greatly improve the compactness and abrasion resistance of the concrete surface.

2. It increases the work efficiency by more than 10 times compared with manual operation.

3. Relatively rotating double polisher makes the machine run smoothly, and the operation is safe and labor-saving.

4. Compact structure, small and flexible, which can be used in narrow places such as kitchens, aisles, terraces, balconies, etc.

5. Due to the small diameter of the polish trowel, the wiping area at the corners of the room is about half less than that of a single-head trowel. Smoothing a large area of the ground can give full play to its advantages.

6. Simple structure, easy manufacture, low cost and convenient maintenance.


1. Before operation, check whether the motor, switch, and cable meet the safety requirements. The neutral line of the cable is connected to the cover of the gear box to prevent power accidents.

2. Turn over the trowel after wiring, make the trowel suspend in the air, turn on the switch, and check whether the relative rotation direction of the trowel is correct.

3. Check whether the trowel blades, safety cover and bolts of each part are loose.

4. In order to ensure the flatness of the ground during the polishing operation, the operators who enter the field should wear flat shoes.

5. After the work, the residual mortar on the machine should be removed in time, and the connecting screws of the trowel and the trowel should be wiped clean, and then coated with butter for protection.

Data Sheet

Model LW-1000A LW-1000B LW-1000C LW-1000D
Weight 81kg 87kg 92kg 98kg
Size (length*width*height) 1000*1000*350mm 1000*1000*350mm 1000*1000*350mm 1000*1000*350mm
Grinding disc diameter 1000mm 1000mm 1000mm 1000mm
Blade size (length * width) 340*150mm 340*150mm 340*150mm 340*150mm
Blade thickness 1.2/1.6/2.0/2.2mm 1.2/1.6/2.0/2.2mm 1.2/1.6/2.0/2.2mm 1.2/1.6/2.0/2.2mm
Disc thickness 2.0/2.3/2.75/3.0/3.5mm 2.0/2.3/2.75/3.0/3.5mm 2.0/2.3/2.75/3.0/3.5mm 2.0/2.3/2.75/3.0/3.5mm
Rotor speed(r/min) 140/180 140/180 140/180 140/180
Power 7.5hp 7.5hp 7.5hp 7.5hp
DMRS-900-Chrome-Plated-Polishing-MachineExhibition pictures(1) Exhibition pictures(2) Exhibition pictures(3)


Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
  • *
Home Tel Mail Inquiry