Chrome-Plated-Polishing-Machine
GW50-Steel-Bar-Bending-Machine
GQ45-Steel-Bar-Cutting-Machine
Walk-behind-power-concrete-screed

DMRS 600 Concrete Power Trowel Machine

Model: LW600
Grinding disc diameter: 600mm
Blade thickness: 1.2/1.6/2.0/2.2mm
Disc thickness: 2.0/2.3/2.75/3.0/3.5mm
Power: 6.5HP
all above can be customised.

Introduction

The trowel machine for the domestic latest concrete surface, coarse and fine grinding machine.This power trowel could make the surface more smooth, level off, can greatly improve the compactness of concrete surface, resistance to wear. Can greatly improve work efficiency, the artificial operation can be improved more than dozens of times. walk behind gasoline power trowel machine is widely used in concrete pavement, ground level ground, airport, floor, etc.

Features

1. The characteristics of stable operation and uniform rotation speed of the turntable ensure the quality of troweling.

2. Durable, effectively extending the working life of the machine.

3. The throttle switch increases the safety of work.

4. The increase of the handle facilitates the transportation of the machine to the work site.

5. The body is small and easy to use.

Manual

1. Before operation, check whether the motor, switch, and cable meet the safety requirements. The neutral line of the cable is connected to the cover of the gear box to prevent power accidents.

2. Turn over the trowel after wiring, make the trowel suspend in the air, turn on the switch, and check whether the relative rotation direction of the trowel is correct.

3. Check whether the trowel blades, safety cover and bolts of each part are loose.

4. In order to ensure the flatness of the ground during the polishing operation, the operators who enter the field should wear flat shoes.

5. After the work, the residual mortar on the machine should be removed in time, and the connecting screws of the trowel and the trowel should be wiped clean, and then coated with butter for protection.

Data Sheet

Model LW-600
Weight 50kg
Size (length*width*height) 600*600*350mm
Grinding disc diameter 600mm
Blade thickness 1.2/1.6/2.0/2.2mm
Disc thickness 2.0/2.3/2.75/3.0/3.5mm
Power 6.5HP
Chrome-Plated-Polishing-Machine
LINGWEI-1000-Ride-On-Power-Trowel
DMRS-700-Chrome-Plated-Polishing-Machine
DMRS-800-Chrome-Plated-polishing-Machine
DMRS-900-Chrome-Plated-Polishing-Machine
Chrome-Plated-Polishing-Machine-DMRS-1000Exhibition pictures(1) Exhibition pictures(2) Exhibition pictures(3)
concrete-road-polisher-show
office2
packing-box
our-team
production-equipment
rebar-cutter-workshop
customer-visit-2
meeting
stirrup-bender-shipping-Malaysia

INQUIRY

Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
  • *
Home Tel Mail Inquiry