GF20 Rebar Stirrup Bending Machine

Model: GF20
Bending Diameter: 6-16mm
Machine Weight: 85kg
Machine Size/mm (Length*Width*Height): 780*490*800
Rated Voltage: 380V/Customized
Motor Power: 2.2KW


GF20 Rebar Stirrup Bending Machine is used to bent deformed rebar into geometric shapes stirrups and column rings for many construction projects and bridge projects. GF20 Rebar Stirrup benders can bend 4-16mm rebars into required shape of stirrups with high efficiency.



1. The machine applied CNC panel control, the bending process is precision and easy to operate.

2. The machine body is applied with high quality steel support structure and operation platform, it’s strong and durable.

3. The motor is assembled with 100% pure copper wire, it powerful, stable and durable.

4. The bend speed can be automatically controlled by electricity, and the brake can ensure the bending angle.

5. The casting big wheels of the machine make it moves easily and durable.



1. Check the mechanical performance, make sure the workbench and the bending machine table are kept level; and prepare mandrel tool blocks.

2. According to the diameter of the processed steel bar and the requirements of the hoop bending machine, install the mandrel, the forming shaft, the stop shaft or the variable stop. The diameter of the mandrel should be 2.5 times the diameter of the steel bar.

3. Check the mandrel, the stopper, and the turntable should be free from damage and cracks, and the protective cover should be fastened and reliable, and operation can only be performed after no load running.

4. During operation, insert one end of the steel bar that needs to be bent into the gap provided by the turntable, and the other end is tightly fixed against the machine body and pressed by hand to check that the machine body is fixed. It can be moved only when it is installed on the side blocking the steel bars.

5. It is strictly forbidden to replace the mandrel, change the angle, and adjust the speed during the operation, and do not add oil or remove it.

6. When bending steel bars, it is strictly forbidden to process steel bars that exceed the diameter, number of bars and mechanical speed specified by the machine.

7. When bending high-hardness or low-alloy steel bars, the maximum restricted diameter should be changed according to the mechanical nameplate, and the corresponding mandrel should be exchanged.

8. It is strictly forbidden for people to stand on the side of the fuselage that is not fixed within the working radius of the bent steel bars. The bent semi-finished products should be stacked neatly, and the hooks should not face upwards.

9. When the turntable changes direction, it must be done after stopping.

10. After the work is completed, clean up the site, maintain machinery, and lock the box.

Data Sheet

Model GF20
Machine Weight 85kg
Machine Size / mm (Length*Width*Height) 780*490*800
Rated Voltage 380V/Customized
Motor Power 2.2KW
Bending Diameter 6-16mm
WorkshopExhibition pictures(1)
Exhibition pictures(2) Exhibition pictures(3) office


Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
  • *
Home Tel Mail Inquiry