GF32 Model Rebar Stirrup Bending Machine is the most widely used cost effective Making Rebar Stirrup Machine, it is designed to bent various HRB steel bars into engineering geometric shape of stirrups used for construction sites. The set bend angle is 90 and 135 degree, but it also can be adjusted. The bending capacity of GF32 stirrup bender is 6-28mm.
1. GF32 stirrup bend machine adopted CNC control panel, the output stirrups are with precision angle and shapes, quite lowest errors.
2. The GF32 rebar stirrup bending machine’s motor is applied with 100% pure copper wire, which makes the power is high and stable.
3. The machine pushing baffle, disc, gears, gear box, shafts are all made with high quality alloy steel materials, it’s durable and wear resistant.
4. The stirrup bender frames are made of thickened angle steel, and the workbench are widened and made of thickened steel plate, it’s stable when working.
5. The full enclosed gearbox of the machine, ultra-low working noise, mooth functioning.
6. The machine is quite easy to operate, one work man can operate, it’s quite high efficiency.
2. According to the diameter of the processed steel bar and the requirements of the hoop bending machine, install the mandrel, the forming shaft, the stop shaft or the variable stop. The diameter of the mandrel should be 2.5 times the diameter of the steel bar.
3. Check the mandrel, the stopper, and the turntable should be free from damage and cracks, and the protective cover should be fastened and reliable, and operation can only be performed after no load running.
4. During operation, insert one end of the steel bar that needs to be bent into the gap provided by the turntable, and the other end is tightly fixed against the machine body and pressed by hand to check that the machine body is fixed. It can be moved only when it is installed on the side blocking the steel bars.
5. It is strictly forbidden to replace the mandrel, change the angle, and adjust the speed during the operation, and do not add oil or remove it.
6. When bending steel bars, it is strictly forbidden to process steel bars that exceed the diameter, number of bars and mechanical speed specified by the machine.
7. When bending high-hardness or low-alloy steel bars, the maximum restricted diameter should be changed according to the mechanical nameplate, and the corresponding mandrel should be exchanged.
8. It is strictly forbidden for people to stand on the side of the fuselage that is not fixed within the working radius of the bent steel bars. The bent semi-finished products should be stacked neatly, and the hooks should not face upwards.
9. When the turntable changes direction, it must be done after stopping.
10. After the work is completed, clean up the site, maintain machinery, and lock the box.
|Rebar Bending Diameter||
|Machine Size / mm (Length*Width*Height)||
- Steel Bar Cutting Machine
- Brick Cutting Machine
- Steel Bar Straightening Cutting Machine
- Steel Bar Straightening Machine
- Steel Bar Bending Machine
- Tamping Machine
- Road Polishing Machine
- Road Cutting Machine
- Power Concrete Screed
- Road Dust Cleaning Machine
- Construction Tricycle Truck
- Terrazzo Machine
- More Products
Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.