GF36 Rebar Stirrup Bending Machine

Model: GF36
Rebar Bending Diameter: 6-32mm
Machine Weight: 230kg
Machine Size/mm (Length*Width*Height): 880*700*860
Rated Voltage: 380V/Customized
Motor Power: 3KW


GF36 Model Rebar Stirrup Bending Machine is also called rebar hoop bending machine, it’s used to bend the deformed steel bars into geometric shape stirrups or columns like Square, rectangle, diamond, polygon shapes and used to fasten main rebar structures. Rebar stirrup bender machine is the most widely used rebar bending machines in construction machinery.


1. GF36 Model stirrup bender machine is a intelligent CNC control model, just need to preset the angle and shape of the stirrups, then the machine will bend the required shapes, with quite lowest errors.

2. The GF36 rebar stirrup bending machine is equiped with 100% pure copper wire motor, so the motor is quite stable and have long service life.

3. The GF36 Stirrup making machine main parts like the pushing baffle, rotation disc, gears, gear box, shafts are all made of alloy steels, it’s durable and wear resistant.

4. The frames of the GF36 stirrup bending machine are made of thickened angle steel, and the workbench are widened and made of thickened steel plate, works quite stable.

5. The gearbox of the stirrup bending machine is full enclosed and the lubrication system is working efficiently, so the machine is with ultra-low working noise, smooth functioning.

6. The machine is quite easy to operate, it has dual foot control pedal, but one work man can operate, it’s quite high efficiency.



1. Check the mechanical performance, make sure the workbench and the bending machine table are kept level; and prepare mandrel tool blocks.

2. According to the diameter of the processed steel bar and the requirements of the hoop bending machine, install the mandrel, the forming shaft, the stop shaft or the variable stop. The diameter of the mandrel should be 2.5 times the diameter of the steel bar.

3. Check the mandrel, the stopper, and the turntable should be free from damage and cracks, and the protective cover should be fastened and reliable, and operation can only be performed after no load running.

4. During operation, insert one end of the steel bar that needs to be bent into the gap provided by the turntable, and the other end is tightly fixed against the machine body and pressed by hand to check that the machine body is fixed. It can be moved only when it is installed on the side blocking the steel bars.

5. It is strictly forbidden to replace the mandrel, change the angle, and adjust the speed during the operation, and do not add oil or remove it.

6. When bending steel bars, it is strictly forbidden to process steel bars that exceed the diameter, number of bars and mechanical speed specified by the machine.

7. When bending high-hardness or low-alloy steel bars, the maximum restricted diameter should be changed according to the mechanical nameplate, and the corresponding mandrel should be exchanged.

8. It is strictly forbidden for people to stand on the side of the fuselage that is not fixed within the working radius of the bent steel bars. The bent semi-finished products should be stacked neatly, and the hooks should not face upwards.

9. When the turntable changes direction, it must be done after stopping.

10. After the work is completed, clean up the site, maintain machinery, and lock the box.

Data Sheet



Bending Diameter 6-32mm
Machine Size / mm (Length*Width*Height)


Rated Voltage


Motor Power


Machine Weight


WorkshopExhibition pictures(1)
Exhibition pictures(2) Exhibition pictures(3) office


Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
  • *
Home Tel Mail Inquiry