GT4-12-Steel-Bar-Straightening-and-Cutting-Machine(blue)
GT4-10-Steel-Bar-Straightening-Cutting-Machine
DMRS-800-Chrome-Plated-polishing-Machine
GW45-Steel-Bar-Bending-Machine

GT4-12 Steel Bar Straightening and Cutting Machine

Model: GT4-12
Straightening Diameter: 4-12mm
Motor: 9Kw, 11Kw
Voltages: 220V/230V/240V/380V/Customized
Straightening Speed: 40-60m/min
Net Weight: 300kg
All above can be customised.

Introduction

GT4-12 model steel bar (rebar) straightening and cutting machine is designed for straighten and cut round bar with diameter of Φ4-12mm and ribbed bar with diameter of Φ4-10mm, there are multiple models machines according to different straightening motor powers, and the straightening speed can reach 70m/min. The machine is also used to straighten cold-drawn steel bars, stainless steel wire, aluminum wires etc. This machine is widely used in cement precast parts factory and road, bridge, house bulding, construction site, etc.

Features

1. Easy to Handle CNC controlled automatic machine: the machine is CNC controlled automatic straightening and cutting machine, it’s quite easy to set straightening speeds and cutting length.

2. High efficiency: high cutting speed, precise electronic ruler, high cutting accuracy, neat cutting face, very small errors, one-time forming, without manual adjustment.

3. Reliable performance: the whole machine body uses good quality steel, components and parts, the traction wheels, straightening die are wear-resistant and the cutting knives are durable.

4. Safe and energy saving: the machine use high efficiency motors, low power consumption. Use safety shield and grounding insulation equipment for workers, also the dust prevention measures to keep the machine safe.

Manual

1. The steel bar straightener shall be taken care of by a dedicated certified person.

2. The operator is not allowed to leave the machine too far during the operation, and the machine must be shut down during feeding, threading, and head cutting.

3. In the process of straightening the steel bars, press the limit switch in time to stop cutting the steel bar when the steel bar jumps out of the tray guide groove, does not reach the fixed-length mechanism, or the messy wire or the steel bar falls off, and adjust the machine before restarting.

4. When adjusting each rebar to the end or straightening short rebars, users shall hold the casing to escort the rebars to the guide and straightening barrel to avoid accidents when they swing freely.

5. Before the straightening mold is fixed and the protective cover is not covered, the steel bars are not allowed to penetrate to prevent the straightening mold from flying out and hurting people after the machine is started.

6. During the operation of the machine, do not adjust the roller, do not operate with gloves, and do not do maintenance during the operation of the machine.

7. The straightened and cut steel bars should be stacked in small bundles according to the specifications and the numbers. They are not allowed to pile up in a random manner to prevent quality accidents caused by different steel components and properties. After the operation is completed, the power must be cut off.

8. Strictly implement the safety instruction to ensure that the machinery is in good working condition.

Data Sheet

Model 4-12A 4-12B
Straightening Diameter Round Rebar:4-12mm Deformed Rebar: 4-10mm Round Rebar:4-12mm Deformed Rebar: 4-10mm
Cutting Lengths Precision ±0.5mm ±0.5mm
Straightening and traction Motor 9kw 11kw
Voltages 220V/230V/240V/380V/ Customized 220V/230V/240V/380V/ Customized
Straightening Speed 40m/min 40-60m/min
Net Weight 280kg 450kg
Overall Dimension 1650*640*950 1350*600*1100
Model 4-12C 4-12D
Straightening Diameter Round Rebar:4-12mm Deformed Rebar: 4-10mm Round Rebar:4-12mm Deformed Rebar: 4-10mm
Cutting Lengths Precision ±0.5mm ±0.5mm
Straightening and traction Motor 15kw+5.5kw 9kw
Voltages 220V/230V/240V/380V/ Customized 220V/230V/240V/380V/ Customized
Straightening Speed 58m/min 45m/min
Net Weight 850kg 550kg
Overall Dimension 2400*660*1010 1900*640*105
Model 4-12E 4-12F
Straightening Diameter Round Rebar:4-12mm Deformed Rebar: 4-10mm Round Rebar:4-12mm Deformed Rebar: 4-10mm
Cutting Lengths Precision ±0.5mm ±0.5mm
Straightening and traction Motor 15kw+5.5kw 9kw
Voltages 220V/230V/240V/380V/ Customized 220V/230V/240V/380V/ Customized
Straightening Speed 0-70m/min 40m/min
Net Weight 900kg 320kg
Overall Dimension 2350*70*1130 1600*780*800
Model 4-12G
Straightening Diameter Round Rebar:4-12mm Deformed Rebar: 4-10mm
Cutting Lengths Precision ±0.5mm
Straightening and traction Motor 9kw
Voltages 220V/230V/240V/380V/ Customized
Straightening Speed 40m/min
Net Weight 300kg
Overall Dimension 1400*600*950
GT4-12-Steel-Bar-Straightening-and-Cutting-Machine(blue)
GT4-10-Steel-Bar-Straightening-Cutting-Machine
GT4-14Steel-Bar-Straightening-Cutting-Machine
GT4-14-Steel-Bar-Straightening-Cutting-Machine-1
rebar-straightening-machine-show
office
rebar-straightener-cutter-warehouse
training-office
client-visit
Exhibition pictures(1)
Exhibition pictures(2) Exhibition pictures(3) stirrup-bender-shipping-Malaysia
concrete-road-cutter-shipping-new-zealand

INQUIRY

Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
  • *
Home Tel Mail Inquiry