GT4-16 Steel Bar Straightening Cutting Machine

Product: Steel Bar Straightening Cutting Machine
Model: GT4-16
Cutting Diameter: 4-16mm.
Straightening Speed: 0-70m/min
Power: 15KW


Steel Bar Straightening Cutting Machine GT4-16 is designed to cut the steel bar or rebar with diameter 4-16mm, length 10mm-3000mm (can be lengthened). It is suitable for straightening and cutting of coiled steel bars, bent steel bars and straight steel bars.



1. Fully automated, simple to operate, less noise, and high precision.

2. The special cut-to-length assembly eliminates the continuous cutting and miscutting failures, and the length after cutting reaches zero error.

3. The use of general-purpose bearing steel straightening wheels, alloy steel wear-resistant parts, self-lubricating bearings and other advanced craft materials greatly improve the durability of the machine.

4. This machine is small in size, easy to move in disassembly and assembly, fast feeding speed, no slippage, no bending to the steel bar.

5. This machine prevents the bar surface from damage, and is an ideal steel bar straightening and cutting equipment for users.

6. Adjustable traction speed, low speed for short bars, high speed for long bars.



1. The steel bar straightener shall be taken care of by a dedicated certified person.

2. The operator is not allowed to leave the machine too far during the operation, and the machine must be shut down during feeding, threading, and head cutting.

3. In the process of straightening the steel bars, press the limit switch in time to stop cutting the steel bar when the steel bar jumps out of the tray guide groove, does not reach the fixed-length mechanism, or the messy wire or the steel bar falls off, and adjust the machine before restarting.

4. When adjusting each rebar to the end or straightening short rebars, users shall hold the casing to escort the rebars to the guide and straightening barrel to avoid accidents when they swing freely.

5. Before the straightening mold is fixed and the protective cover is not covered, the steel bars are not allowed to penetrate to prevent the straightening mold from flying out and hurting people after the machine is started.

6. During the operation of the machine, do not adjust the roller, do not operate with gloves, and do not do maintenance during the operation of the machine.

7. The straightened and cut steel bars should be stacked in small bundles according to the specifications and the numbers. They are not allowed to pile up in a random manner to prevent quality accidents caused by different steel components and properties. After the operation is completed, the power must be cut off.

8. Strictly implement the safety instruction to ensure that the machinery is in good working condition.

Data Sheet

Model Straightening Motor Oil Pump Motor Round Steel Bar Diameter Rebar Diameter Straightening Speed Dimensions
GT4-16 15kW 5.5kW 4-16mm 4-14mm 40-65m/min 3,000*800*1,200mm
GT4-16 Frequency Conversion 15kW 5.5kW 4-16mm 4-14mm 0-70m/min 3,000*800*1,200mm
GT4-14-Steel-Bar-Straightening-Cutting-Machine-1Exhibition pictures(1) Exhibition pictures(2) Exhibition pictures(3)


Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
  • *
Home Tel Mail Inquiry