Steel bar bending machine Model GW40 is used to bent carbon steel bars or rebars into Geometric shapes for construction projects and bridge projects. In order to bend steel bars of various diameters, there are several holes on the working disc for inserting pins, and the pins of different diameters can be replaced.
1. Simple Structure, easy operation and maintenance.
2. Because the double-stage brake motor is directly connected with the reducer for one-stage deceleration, the ratio of input and output revolutions is accurate, the bending speed is stable and accurate.
3. The speed can be automatically controlled by electricity, and the brake can ensure the bending angle.
4. Forward and reverse rotation of the motor to bend the steel bars in double directions.
5. The central shaft can be replaced for easy maintenance.
6. Intelligent control is available.
2. According to the diameter of the processed steel bar and the requirements of the hoop bending machine, install the mandrel, the forming shaft, the stop shaft or the variable stop. The diameter of the mandrel should be 2.5 times the diameter of the steel bar.
3. Check the mandrel, the stopper, and the turntable should be free from damage and cracks, and the protective cover should be fastened and reliable, and operation can only be performed after no load running.
4. During operation, insert one end of the steel bar that needs to be bent into the gap provided by the turntable, and the other end is tightly fixed against the machine body and pressed by hand to check that the machine body is fixed. It can be moved only when it is installed on the side blocking the steel bars.
5. It is strictly forbidden to replace the mandrel, change the angle, and adjust the speed during the operation, and do not add oil or remove it.
6. When bending steel bars, it is strictly forbidden to process steel bars that exceed the diameter, number of bars and mechanical speed specified by the machine.
7. When bending high-hardness or low-alloy steel bars, the maximum restricted diameter should be changed according to the mechanical nameplate, and the corresponding mandrel should be exchanged.
8. It is strictly forbidden for people to stand on the side of the fuselage that is not fixed within the working radius of the bent steel bars. The bent semi-finished products should be stacked neatly, and the hooks should not face upwards.
9. When the turntable changes direction, it must be done after stopping.
10. After the work is completed, clean up the site, maintain machinery, and lock the box.
|Machine Size / mm (Length*Width*Height)||850*730*780|
|Rebar Bending Diameter||6-28mm|
|Round Bar Bending Diameter||6-32mm|
- Steel Bar Cutting Machine
- Brick Cutting Machine
- Steel Bar Straightening Cutting Machine
- Steel Bar Straightening Machine
- Steel Bar Bending Machine
- Tamping Machine
- Road Polishing Machine
- Road Cutting Machine
- Power Concrete Screed
- Road Dust Cleaning Machine
- Construction Tricycle Truck
- Terrazzo Machine
- More Products
Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.