GW50 Steel Bar Bending Machine

Model: GW50
Bending Diameter: 6-36mm
Machine Weight: 310kg
Machine Size/mm (Length*Width*Height): 980*740*810
Rated Voltage: 380V/Customized
Motor Power: 4kw


Steel bar bending machine Model GW50 can be uesd to bend different steel bars like normal carbon steel, hot rolled round steel and screw steel with diameter from 4mm to 50mm according to construction need, extensively applied to construction and steel bar process factories. The bending angles are ranging from 0~180 degree.



1. Solid and reliable, Compact structure, Easy operation, Safe and durable, Stable performance.

2. Easy to remove with four wheels.

3. Gears, gear shafts,working disk,stop gauge,saddles,pile heads and pile head bushes made of high-quality alloyed steel with proper heat treatment.

4. Low noise, lower price, less power consumption.

5. The motors can work continuously, even work under heavy load.

6. The service life is longer.


1. Check the mechanical performance, make sure the workbench and the bending machine table are kept level; and prepare mandrel tool blocks.

2. According to the diameter of the processed steel bar and the requirements of the hoop bending machine, install the mandrel, the forming shaft, the stop shaft or the variable stop. The diameter of the mandrel should be 2.5 times the diameter of the steel bar.

3. Check the mandrel, the stopper, and the turntable should be free from damage and cracks, and the protective cover should be fastened and reliable, and operation can only be performed after no load running.

4. During operation, insert one end of the steel bar that needs to be bent into the gap provided by the turntable, and the other end is tightly fixed against the machine body and pressed by hand to check that the machine body is fixed. It can be moved only when it is installed on the side blocking the steel bars.

5. It is strictly forbidden to replace the mandrel, change the angle, and adjust the speed during the operation, and do not add oil or remove it.

6. When bending steel bars, it is strictly forbidden to process steel bars that exceed the diameter, number of bars and mechanical speed specified by the machine.

7. When bending high-hardness or low-alloy steel bars, the maximum restricted diameter should be changed according to the mechanical nameplate, and the corresponding mandrel should be exchanged.

8. It is strictly forbidden for people to stand on the side of the fuselage that is not fixed within the working radius of the bent steel bars. The bent semi-finished products should be stacked neatly, and the hooks should not face upwards.

9. When the turntable changes direction, it must be done after stopping.

10. After the work is completed, clean up the site, maintain machinery, and lock the box.

Data Sheet

Model GW50
Machine Weight 310kg
Machine Size / mm (Length*Width*Height) 980*740*810
Rated Voltage 380V/Customized
Motor Power 4KW
Rebar Bending Diameter 6-32mm
Round Bar Bending Diameter 6-36mm
Steel-bar-bending-machine-gw40Exhibition pictures(1) Exhibition pictures(2)
Exhibition pictures(3) office2


Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
  • *
Home Tel Mail Inquiry