LW-06-Concrete-Road-Cutting-Machine
LZ-03-Power-Concrete-Screed
LINGWEI-800-Ride-On-Power-Trowel
DMRS-900-Chrome-Plated-Polishing-Machine

LW-06 Concrete Road Cutting Machine

Model: LW-06
Power Type: Water-cooled Diesel Engine
Power: 15HP-25HP
Fuel Consumption: ≤283g/kw·h
Blade Diameter (mm): ≤600mm
Cutting Depth (mm): ≤230mm
Cutting Speed (m/s): 36-45m/s
Water Tank Volume (L): 45L-55L
Machine Rack Weight (kg): 92kg
Machine Size/mm (L*W*H): 1200×510×750

Introduction

LW-06 Concrete Road Cutting Machine, or concrete saw, is equipped with a water cooled diesel engine, and the output power can be 15HP-25HP. This concrete sawing machine is designed with 600mm diamond cutting blade, so the cutting depth can be 100-200mm, which is adjustable to meet customers needs.

This concrete road saw is a walk-behind type machine cutting concrete floor, concrete road, asphalt road, bricks, block, stone, tile, masonry, expansion gap, kerf, joints, manhole, concrete pillar, pattern, etc. For you health, this machine can be made with wet cutting for dust control.

Features

1. LW-06 water cooled diesel engine road cutter machine is the most powerful cutting machine, famous brand diesel engine assures the long service lift of the machine.

2. The cutting blade of the concrete road cutting machine is using a high tech formula diamond saw blade, it’s wear resistant and the cutting rang is wide.

3. The machine is applied with a big volume water tank, the water spray system can clean the dust on the blade and cool the blade meanwhile.

4. There is a adjustable handle on the front of the machine holder, which can adjust the cutting blade rise and down, so as to control the cutting depth very easily.

5. The machine cut blade can be changed into a dry cutting blade, which can used to clean the expansion joints of the concrete road.

6. The leading wheel in front of the machine keeps the cutting in a straight line, keeps the neat cutting results.

7. Wet cutting available for dust suppression.

Manual

1. Before starting the concrete saw, check the bolts and nuts of each part to make them fastened; check the power supply and wiring to prevent power leakage; check the rotation direction of the saw blade to make it the same direction marked on the protective cover, and the machine can be started after the checking.

2. Before starting work, the water tank shall be filled with water; when working, the water pipe switch shall be turned on in time, and water shall be sprayed to the saw blade for cooling and dust suppression.

3. The cutting depth is adjusted by the hand wheel. Max. depth: 230mm. Using hand to rotate hand wheel to make the screw nut rotate up and down, so the height of the front wheel changes, and the saw blade rises or falls accordingly.

4. Before cutting, the saw blade shall leave the ground. After the saw blade is running normally, slowly rotate the hand wheel to make the machine head fall. When the saw blade cutter has a predetermined depth, it can move forward. At this time, the guide rod should be put down, so that the guide wheel touches the ground.

5. When cutting, the eyes shall watch the guide wheel to keep the direction of the cutting seam, and push the push handle with both hands to make the guide wheel move along the predetermined cutting line to ensure the cutting straightness.

6. When cutting too deep or encountering hard materials due to excessive speed, the motor is overloaded and the speed is reduced. At this time, stop cutting or slow down the traveling speed to protect the motor, diesel engine, gasoline engine and saw blade from damage.

7. Before the motor stops, the concrete saw blade shall stop the cutting and leave the ground. In the non-working state, the saw blade is strictly prohibited from touching the ground to prevent deformation and damage of the saw blade.

8. When the concrete saw guide wheels and traveling wheels need to cross the cut parts (such as arranged cement prefabricated slabs, stone slabs, etc.), users can lay steel plates or angle steels on the cut parts, and let the front and rear wheels pass through for cutting jobs.  

Data Sheet

Model LW-06
Power Type Water-cooled Diesel Engine
Power 15HP-25HP
Fuel Consumption ≤283g/kw·h
Blade Diameter (mm) ≤600mm
Cutting Depth (mm) ≤230mm
Cutting Speed (m/s) 36-45m/s
Water Tank Volume (L) 45L-55L
Machine Rack Weight (kg) 92kg
Machine Size/mm (L*W*H) 1200×510×750
LW-06-Concrete-Road-Cutting-Machine
LW-05-Concrete-Road-Cutting-Machine
LW-04-Concrete-Road-Cutting-Machine
LW-02-Concrete-Road-Cutting-Machine
LW-03-Concrete-Road-Cutting-Machine
LW-01-Concrete-Road-Cutting-Machine
WorkshopExhibition pictures(1) Exhibition pictures(2) Exhibition pictures(3)
office
customer-visit
steel-bar-straightening-cutting-machine
warehouse
product-delivery
lingwei-people

INQUIRY

Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
  • *
Home Tel Mail Inquiry